lightning event counter

ADT Counter

MEASURING DEVICES
ADT Counter, lightning strike counter.

Adaptable to any down conductor without disconnecting or disconnecting.

Great robustness, reliability and completely autonomous, it does not need external power.

Meets with EN 62561-1, 50164-6 and UTE C 17-106.

Reference: 600 920.

Quick and easy installation. It is not necessary to disconnect or disconnect the downpipe at any time. Only one Allen wrench is included that is included with the device.

PRODUCT DESCRIPTION


ADT counter is a lightning impact counter. It is a recommended control element in all installations. Counts and records the lightning impact number that the installation has supported. Due to its design and materials, it is robust, reliable and autonomous, it does not need external power supply. Compatible with any lightning conductor.
It can also be used to register overvoltages.

LOCATION


The most common location is in the downspout with less ohmic resistance, or failing that in the straighter and shorter. Normally just above the protection tube, 2 or 3 meters above the ground level but can also be installed at any other point of the downpipe, even in the manhole..

INSTALLATION


Quick and easy installation. It is not necessary to disconnect or section the drainpipe at any time. You only need an Allen key that is included with the device.

CHARACTERISTICS


  • Minimum threshold current (Itc 8/20 μs) – 1 kA
  • Current supported and counted (Imcw 10/350 μs) – 100 kA
  • Valid for plate up to 60 x 10 mm and for round up to Ø 15 mm.
  • Operating temperature: (-20º C hasta +65º C).
  • Weight: 285 gr.
  • Measures: 82 x 69 x 45 mm.
  • Meets with EN 62561-1, 50164 and UTE C 17-106.

Other products: CATALOGUE